SnipePod V2 Tripod Conversion for V2


The V2 Tripod conversion is designed to leverage your existing V2 SnipePod that you use for shooting. The V2 Tripod is simply one more leg, the same length as your V2 SnipePod that quickly snaps into the top ball socket assembly and provides a 1/4" X 20 TPI optic stud for attaching optics and cameras.

The sitting models of the V2 SnipePod all tip the scale at an amazing 5 ounces or less. The 3L-V2 Tripod conversion tips the scale at under 2 ounces! Imagine shedding the typical bulky multi-pound tripod for a 2 ounce 3L-V2 Tripod conversion that fits into the palm of your hand. 

Each 3L-V2 Tripod conversion comes with a triple-string as shown. The triple-string has CNC machined clips with a slot to allow slipping over the bungee cord and then over the silver inside Easton tube ferrule. Once the leg is assembled, the bungee cord holds the clips in place. Install the clips on the second ferrule from the top of the leg. Spreading each of the three legs out just enough to introduce a slight bow to the legs will further enhance stability. Check out the SnipePod Optic Balance Adjuster Plate if you need to compensate for optics that do not have their female 1/4 X 20 attachment point properly place at the balance point.

Like the V2 SnipePod, the 3L-V2 Tripod conversion has a ball socket on the top of the leg. This allows the third leg to be placed independently around ground obstacles or to adjust for inclines. Once the legs are positioned for maximum viewer comfort, attach a weight to the centre of the triple string. 

SnipePod V2 Tripod Conversion for V2